Basic Info.
After-sales Service
24/7 Service for You
Certification
ECE, CE, ISO9001, CCC, ISO/TS16949
Types of Suspension Systems
Cross Arm Type
ABS Anti-lock Braking System
ABS Anti-lock Braking System
Manhole Cover
Carton Steel or Aluminum Alloy API Manhole Cover
Discharging Pipe
4 Inch Rubber Hose, 2PCS, 6m/Each
Application
Transport Fuel, Oil, Diesel
Compartments
1 to 8 Compartments, Based on Customer Needs
Axles Brand
Fuwa / BPW / Wdl Brand
Tire
295/70r22.5 315/80r22.5 385/65r22.8 1200r24
Specification
42000~45000liters
Product Description
Hot-selling semi trailer oil tank semi trailer in African mark
Specification
| 1. GENERAL | |
| Type | Tri-axle semi-trailer |
| Application | Fuel SPD |
| Tare weight (±3%) | 6 086 kg |
| Weight distribution | Front 16 000 kg, Rear 24 000 kg, Total 40 000 kg |
| Coupling height | Unladen 1 320 mm |
| Wheelbase | 8 725 mm (not for operation in S.A.) |
| 2. TANK | |
| Design Capacity (gross) | 45 000 litre |
| Compartments | Six (7495, 7417, 7487, 7492, 7427 & 7452 litre) |
| Payload in petrol (estimated) | 30 870 kg (42 000 litre @ SG=0.735) (7000, 7000, 7000, 7000, 7000 & 7000 litre) |
| Payload in diesel (estimated) | 34 235 kg (41 000 litre @ SG=0.835) (7000, 6500, 6500, 7000, 7000 & 7000 litre) |
| Designed According to | EN13094 (not for operation in S.A.) |
| Pressure Vessel | n/a - pressure tested to 39kPa |
| Products | Petrol (UN1203), Diesel (1202), Kerosene (UN1223) |
| Shape | Elliptical forward, cone and rear section |
| Material | Aluminium 5182H111(T500)/ XTRAL |
| Design temperatures | -20°C to + 50°C |
| End, compartment domes & baffles | 5.2 mm before forming thickness (guaranteed 5mm after forming thickness) (baffles with 500mm diameter reinforced manholes) |
| Shell | 5.1 mm before forming thickness (guaranteed 5mm after forming thickness) |
| Reinforcement | Aluminium T section stiffeners |
| Overturn Protection | Extruded aluminium valance c/w transverse protection members |
| Mild Steel finish | Shot blasted and painted Grey RAL7031 |
| Aluminium tank exterior finish | Cleaned and painted White RAL9016, Additional paint colours can be included |
| | |
| 3. TANK FITTINGS | |
| Manholes and Lids | 6 off - ZHE 500mm Bolt down type c/w pressure/vacuum vent & emergency vent | Dipstick guide fitted on inside of each filling hatch to be extended to the floor of each compartment |
| Vapour Recovery System | Not fitted |
| Overfill Sensors | Not fitted |
| 4. CHASSIS | |
| Material | Aluminium |
| Rear Under-run Bumper | Mild steel section |
| Landing Legs | Jost E112-A-48-002 with a single 2-speed gearbox |
| Rubbing Plate | Mild Steel 12mm with Jost 50 mm flanged kingpin |
| Suspension | GRW, Air Suspension |
| Axles | GRW Propar Drum Brake axles |
| Lift Axle optional extra | Not fitted, can be included as an optional extra |
| Rims | 7 off - 11.75*22.5 Steel rims |
| Tyres | 7 off - 385/65R22.5 - Double Star DSR118 - Super singles. As an optional extra, Bridgestone R168 tyres can be fitted instead of Double Star |
| 5. OUTLET PIPING AND VALVES |
| Bottom Discharge Valves | 6 off - ZHE pneumatic operated 100mm (pressure non-compensated). Niehuser valves can be used in place of ZHE as optional extra |
| Valve Operation | Niehueser pneumatic button block | Air service unit with isolating valve, lubricator, regulator and pressure gauge | Emergency release red knob fitted on far side | Six off aluminium compartment capacity plates | Any pneumatic piping that are in direct sunlight to be covered by sleeving |
| Tank Discharge Lines | Individual pipes |
| Load/unload Adaptors | 6 off ZHE 100mm API open able + cap fitted. Niehuser valve can be used in place of ZHE as optional extra |
| Drip tray | Cabinet fitted around discharge adaptor c/w drip-tray under API |
| Protection over Load/unload Adaptors | Cabinet door closes in front of discharge API |
| Product Meter | Not required |
| Product Pump | Not required |
| 6. OTHER EQUIPMENT | |
| Braking System | WABCO EBS - 24Volt. Any pneumatic piping that are in direct sunlight to be covered by sleeving |
| Brake coupling hoses | Truck tractor to be equipped with Red & Yellow brake hoses suzi's - done by customer |
| Electrical System | 12/24 V systems |
| Rear Lights | 2-off Combination stop/tail/indicator lamp per side |
| Reverse lamp | 1 off fitted per side |
| Anti-theft grid | Fitted over rear lights & number plate lights |
| High Level Rear Lights | One additional high level Combination stop/tail/indicator lamp per side |
| Side Marker Lights | 5-off Fitted per side |
| Work light | Not fitted |
| Fire Extinguisher | Two 9kg STP cylinders mounted in Red G.R.P. holders |
| Hazchem Holders | Only Hazchem placards (1203) affixed to rear and both sides of tank shell. As an optional extra, Hazchem Plackard Boards can be fitted instead of non-ABS |
| Hose Tray | Single 270mm wide aluminium extruded hose tray |
| Gravity delivery hose | Not fitted. As an optional extra the following can be added (option 8) : Two off 100mm x 4,5 metre Composite Fuel hoses / Permanently fixed hose ends : 4" API Gravity drop coupler on tanker end and 4" Type D Female Camlock coupler on the other end - c/w dust plugs |
| Handrail and Manhole Locking Device | Aluminium handrail on one side (manual operated) fitted To prevent tampering at the manlid and flanges on tank top, the following can be included as optional extra : Complete handrail covered with aluminium plate c/w manual locking (barrel bolt type) |
| Tank Access Ladder | Aluminium tubing 40mm with fluted rungs at rear of tank |
| Drain Pipes | At front and rear of spill box, running through tank shell |
| Front Mudguards | Not fitted · As an optional extra, stainless steel front mudguards can be fitted |
| Rear Mudguards | Black plastic single wheel type - spray suppression mud flaps fitted to rear of all mudguards |
| Side Under-run Protection | Aluminium dual side rails |
| Spare Wheel Carrier | Winch type provided - dual - 1x Super Single & 1x dual type wheel |
| Static Cable | Reeled coated stainless steel static cable with cable clamp fitted near side |
| Internal Bonding | Static cables from top to bottom of tank in each compartment |
| Bonding Point | External bonding point : · 1 off per vehicle side · must be marked with ground marking signs |
| Toolbox | One off lockable rotationally moulded plastic tool box |
| Walkway | Safety Walk Black strips along the length of the spill box |
| Wheel Chocks | Two wheel chocks of non-sparking material - stowed far-side guard area |
| 7. MISCELLANEOUS | |
| Plates | Vehicle information, load capacity plates |
| Reflective Tape | Yellow to the sides and red to the rear tailboard. |
| Chevron Board | 1,8 m |
| Hazchem Placards | Three off - UN no. 1203 class 3 - DETAIL TO BE CONFIRMED WITH CUSTOMER |
| Information Stickers | No Smoking, No Open Flame and No Cell phones stickers to be fixed to rear and both sides |
| Dipstick | · 6-off Aluminium dipsticks with nylon tip stowed on tank top - dipstics to be blanc without any markings · The following must be included o Dipstick guide fitted on inside of each filling hatch to be extended to the floor of each compartment |
| Calibration Chart | Supplied |
| Customer Decals | Not Included - can be included as an optional extra |
The trailer model we show is Our standard product; meanwhile, all our trailers can be customized according to your unique requestFAQ:A. What are our advantages compared with other competitors?√√ Competitive Price -- We're semi factory. We have 20 years of production and design experience; All accessories are selected from high quality suppliers;.From numerous comparison and feedback from clients, our price is more competitive than other competitors.√√ Quick Response--Our team is consisted of a group of diligent and enterprising people, working 24/7 to respond client inquiries and questions all the time. Most problems can be solved within 12 hours.√√ Fast delivery --Normally it will take more than 25-45 days for other companies to produce the ordered trailers, We are our own factory, we can have a 15-20 days delivery of regular trailers for our clients.B. Which payment terms can we accept?Normally we can work on T/T term or L/C term.√√ On T/T term, 30% down payment is required in advance, 70% balance shall be settled before delivery, or against the copy of original B/L for regular client.√√ On L/C term, normally need 30% down payment by T/T, 70% by L/C at sight. a 100% irrevocable L/C without "soft clauses" can be accepted sometimes. Please seek the advice from the individual sales manager whom you work with.C. How long will our price be valid?√√ Price with long valid time --We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year. We only adjust our price based on two situations:The rate of USD:RMB varies significantly according to the international currency exchange rates.Manufacturers/factories adjusted the trailer price, because of the increasing labor cost and raw material cost.D. What logistics ways we can work for shipment?We can ship all trailer by various transportation tools.√√ For 90% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc, either by container or RoRo/Bulk Shipment.√√ For neighborhood countries of China, such as Russia, Tajikistan, Kazakhstan,Mongolia etc, we can ship trucks by road or railway.√√ For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex.*********************************************************************CONTACT :Xana --- Exporting Manager
Address:
No16, Dongma Road, Quanpu Town, Liangshan Country, Jining, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Apparel & Accessories, Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Manufacturing & Processing Machinery, Transportation
Company Introduction:
We are an industrial and trade company. We have our own factory, Shandong WODE XYE Transportation Equipment Co., Ltd...Our factory is located in Liangshan, China′s trailer production base, with 260 employees. Our factory is a special automobile production and trailer production enterprise with independent import and export management rights
Approved by the Ministry of Industry and Information Technology. The products have obtained the national compulsory product quality "CCC" certification and passed the ISO9001-2015 international quality management system certification. Our factory covers an area of 83, 000 square meters, including 38, 000 square meters production workshop. The factory has 280 existing technical workers, including 4 senior engineers, 6 engineers, 11 assistant engineers, 20 senior welding technicians, 3 senior coating technicians and 50 intermediate technicians. With domestic first-class production equipment and the most advanced production lines, our factory is in the leading position in the same industry. The factory pays attention to the research and development of new products and the upgrading of products. It has technical information stations in more than 20 countries and 50 regions around the world, in order to obtain the most advanced international product information in time. Now our company produces more than 60 kinds of trailers. We can design and produce the models according to your needs. Our products sell well in the markets of the Middle East, Africa, East Asia, Southeast Asia and other countries. We are in line with the principle of "Quality First" to achieve a win-win situation for our business. You are always welcome to visit our factory.
){kind=link}